Retrofit kit for Cobalt 2-door halo-style taillights

DIY kit for retrofitting after market taillights for the Cobalt 2-door.

As we no longer offer completely built retrofitted taillights, we now offer these DIY kits so you can make them yourself. We provide everything you need (with the exception of the lights themselves) and the know-how to put them together. You will receive a link to a series of very detailed instructional videos walking you through step-by-step how to do this. The process is not hard, you just need the right tools, and the patience to go through the different steps. We estimate that the entire process for a first-timer will take 6-8 hours, not counting down time while things dry or cure.

THIS KIT DOES NOT INCLUDE AFTER MARKET TAILLIGHTS!
We provide you with links to online sources for the taillights you'll need to purchase. You will need to buy TWO sets in order to make one retrofitted set of taillights.

Red lens set optional
While supplies last, we offer a complete set of brand new red (non-smoked) lenses. By choosing this option, you will only have to purchase - and take apart- one aftermarket taillight set yourself. Avoid the risk of damaging the lenses, the only part of the lights you will see once installed!

DO NOT USE COBALT OEM TAILLIGHTS WITH THIS KIT!
If you choose to use OEM Cobalt taillights anyway, this kit will not provide the desired result and look.

What the kit includes:

1. 2 pairs of halo rings, pre-wired;
2. 2 custom made plug-and-play harnesses;
3. 4oz tube of clear RTV silicone:
4. Solder connector sleeves:
5. Silicone applicator bags:
6. wiring organization tape;
7. Links to available after market taillights you'll need to buy yourself;
8. Link to our detailed instructional how-to videos.

Tools & supplies you'll need to supply yourself perform the retrofit:

1. Two sets of after market taillights (details & where to buy will be included with your kit)
2, Heat gun
3, Dremel with reinformed cutting wheels or ultrasonic cutter
4. Power drill with 1/4" or 7/32" drill bit
5. Basic hand tools (screw drivers, pliers, etc.)
6. (4) metal C-clamps ( https://www.homedepot.com/p/Husky-3-in-Drop-Forged... or similar)
7. (2) Spring clamps ( https://www.flinnsci.com/spring-clamp-2-steel/ap98... or similar)
8. 3M blue painter's tape
9. Spray paint - primer & top coat (only if you choose to black out the housing interiors)

These kits are built to order so please allow 1-2 weeks for us to assemble the harnesses and ship!

Note: taillights retrofitted with this kit might not be street legal; check your local traffic laws.